What is Computer?
Computer is an advanced electronic
device that takes raw data as input from the user and processes these data
under the control of set of instructions (called program) and gives the result
(output) and saves output for the future use. It can process both numerical and
non-numerical (arithmetic and logical) calculations.
|
A computer has four functions:
a. accepts data
|
Input
|
|
b. processes data
|
Processing
|
|
c. produces output
|
Output
|
|
d. stores results
|
Storage
|
Input (Data):
Input
is the raw information entered into a computer from the input devices. It is
the collection of letters, numbers, images etc.
Process:
Process is the operation of data as
per given instruction. It is totally internal process of the computer system.
Output:
Output is the processed data given
by computer after data processing. Output is also called as Result. We can save
these results in the storage devices for the future use.
Computer System
All of the components of a computer
system can be summarized with the simple equations.
COMPUTER SYSTEM = HARDWARE +
SOFTWARE+ USER
•
Hardware = Internal Devices + Peripheral Devices
All physical parts of the computer
(or everything that we can touch) are known as Hardware.
•
Software = Programs
Software gives
"intelligence" to the computer.
•
USER = Person, who operates computer.
Generation of computer:
First Generation (1940-56):
The first generation computers used vaccum tubes &
machine language was used for giving the instructions. These computer were
large in size & their programming was difficult task. The electricity
consumption was very high. Some computers of this generation are ENIAC, EDVAC,
EDSAC & UNIVAC-1.
Second Generation(1956-63):
In 2nd generation computers, vaccum tubes were
replaced by transistors. They required only 1/10 of power required by tubes.
This generation computers generated less heat & were reliable. The first
operating system developed in this generation.
The Third Generation(1964-71):
The 3rd generation computers replaced
transistors with Integrated circuit known as chip. From Small scale integrated
circuits which had 10 transistors per chip, technology developed to MSI
circuits with 100 transistors per chip. These computers were smaller, faster
& more reliable. High level languages invented in this generation.
The fourth Generation(1972- present):
LSI & VLSI were used in this generation. As a result
microprocessors came into existence. The computers using this technology known
to be Micro Computers. High capacity hard disk were invented. There is great
development in data communication.
The Fifth Generation (Present & Beyond):
Fifth generation computing devices, based on artificial
intelligence, are still in development, though there are some applications,
such as voice
recognition, that are being used today. The use of parallel processing
and superconductors is helping to make artificial intelligence a reality. Quantum computation
and molecular and nanotechnology
will radically change the face of computers in years to come.
ARCHITECTURE OF COMPUTER

Input Devices:
Those devices which help to enter data into computer system. Eg. Keyboad,
Mouse, Touchscreen, Barcode Reader, Scanner, MICR, OMR etc.

Bar code Reader MICR used in Bank OMR(Used for answer sheet
evaluation)
Output Devices:
Those devices which help to display the processed information. Eg. Monitor,
Printer, Plotter, Projector



Printer Plotter Projector
CENTRAL PROCESSING UNIT (CPU)
The main component to make a
computer operate is the computer chip or microprocessor. This is referred to as
the Central Processing Unit (CPU) and is housed in the computer case. Together,
they are also called the CPU. It performs arithmetic and logic operations. The
CPU (Central Processing Unit) is the device that interprets and executes
instructions.
Processor
Memory: It facilitates
the remembrance power to computer system. It refers to the physical devices used to store
programs (sequences of instructions) or data (e.g. program state information)
on a temporary or permanent basis for use in a computer or other digital electronic device. The term primary memory is used for the information in
physical systems which are fast (i.e. RAM), as a distinction from secondary memory, which are physical devices for
program and data
storage which are slow to access but offer higher memory capacity.
Primary memory stored on secondary memory is called virtual memory. Primary
Memory can be categorized as Volatile Memory & Non-Volatile Memory.
Volatile
memory(RAM)Volatile memory is computer memory that requires power to maintain the stored information. Most modern semiconductor volatile memory is either Static RAM or dynamic RAM.
SRAM retains its contents as long as the power is connected and is easy to interface to but uses six transistors per bit.

Dynamic RAM is more complicated to interface to and control and needs regular refresh cycles to prevent its contents being lost. However, DRAM uses only one transistor and a capacitor per bit, allowing it to reach much higher densities and, with more bits on a memory chip, be much cheaper per bit. SRAM is not worthwhile for desktop system memory, where DRAM dominates, but is used for their cache memories..
Non Volatile Memory (ROM)
Non-volatile memory
is computer memory that can retain the stored information even when not
powered. 

Examples of
non-volatile memory are flash memory and ROM/PROM/EPROM/EEPROM memory (used for firmware such as boot programs).
Cache Memory:
Cache memory is random access memory (RAM) that a computer microprocessor can access
more quickly than it can access regular RAM. As the microprocessor processes
data, it looks first in the cache memory and if it finds the data there
(from a previous reading of data), it does not have to do the more
time-consuming reading of data from larger memory. It is of two types- L1 cache is on the same chip as the
microprocessor. L2 is usually a separate static RAM (SRAM) chip.
Secondary Memory:
A. Hard Disk (Local Disk)
B. Optical Disks: CD-R, CD-RW,
DVD-R, DVD-RW
D. Floppy Disks
F. Memory Cards
G.
External Hard Disk
H.
Blu Ray Disk


Blu-Ray Disk:
Blu-ray
(not Blue-ray) also known as Blu-ray Disc (BD), is the name of a new optical
disc format. The format offers more than five times the storage capacity of
traditional DVDs and can hold up to 25GB on a single-layer disc and 50GB on a
dual-layer disc. While current optical disc technologies such as DVD, DVD±R,
DVD±RW, and DVD-RAM rely on a red laser to read and write data, the new format
uses a blue-violet laser instead, hence the name Blu-ray.
![]() |
Units of Memory:
The smallest unit is bit, which mean
either 0 or 1.
1 bit =
0 or 1
1 Byte =
8 bit
1 Nibble = 4 bit
1 Kilo Byte = 1024 Byte= 210 Byte
1 Mega Byte = 1024 KB= 210 KB
1 Gega Byte = 1024 MB= 210 MB
1 Tera Byte = 1024 GB= 210 GB
1 Peta Byte =1024 TB= 210 TB
1 Exa Byte =1024 PB= 210 PB
1 Zetta Byte = 1024 EB= 210 EB
1 Yotta Byte = 1024 ZB= 210 ZB
Booting
The
process of loading the system files of the operating system from the disk into
the computer memory to complete the circuitry requirement of the computer
system is called booting.
Types of Booting:
There
are two types of booting:
• Cold Booting: If the
computer is in off state and we boot the computer by pressing the power switch
‘ON’ from the CPU box then it is called as cold booting.
• Warm Booting: If the computer
is already ‘ON’ and we restart it by pressing the ‘RESET’ button from the CPU
box or CTRL, ALT and DEL
key simultaneously from the keyboard then it is called warm booting.
Types of
Computer
On the basis of
working principle
a) Analog Computer
An analog computer is a form of
computer that uses continuous physical phenomena such as electrical,
mechanical, or hydraulic quantities to model the problem being solved.
Eg: Thermometer, Speedometer, Petrol
pump indicator, Multimeter
b) Digital
Computer
A computer that performs calculations
and logical operations with quantities represented as digits, usually in the
binary number system.
c) Hybrid Computer (Analog + Digital)
A combination of computers those are
capable of inputting and outputting in both digital and analog signals. A
hybrid computer system setup offers a cost effective method of performing
complex simulations. The instruments used in medical science lies in this
category.
On the basis of Size
a)
Super Computer
The
fastest type of computer. Supercomputers are very expensive and are employed
for specialized applications that require immense amounts of mathematical
calculations. For example, weather forecasting requires a supercomputer. Other
uses of supercomputers include animated graphics, fluid dynamic calculations, nuclear
energy research, and petroleum exploration. PARAM, Pace & Flosolver are the
supercomputer made in india .

