Sunday, 8 March 2015

Computer Science

What is Computer?
Computer is an advanced electronic device that takes raw data as input from the user and processes these data under the control of set of instructions (called program) and gives the result (output) and saves output for the future use. It can process both numerical and non-numerical (arithmetic and logical) calculations.
A computer has four functions:
a. accepts data
Input
b. processes data
Processing
c. produces output
Output
d. stores results
Storage

Input (Data):

Input is the raw information entered into a computer from the input devices. It is the collection of letters, numbers, images etc.

Process:

Process is the operation of data as per given instruction. It is totally internal process of the computer system.

Output:

Output is the processed data given by computer after data processing. Output is also called as Result. We can save these results in the storage devices for the future use.

Computer System
All of the components of a computer system can be summarized with the simple equations.
COMPUTER SYSTEM = HARDWARE + SOFTWARE+ USER

• Hardware = Internal Devices + Peripheral Devices
All physical parts of the computer (or everything that we can touch) are known as Hardware.
• Software = Programs
Software gives "intelligence" to the computer.
• USER = Person, who operates computer.

Generation of computer:

First Generation (1940-56):
The first generation computers used vaccum tubes & machine language was used for giving the instructions. These computer were large in size & their programming was difficult task. The electricity consumption was very high. Some computers of this generation are ENIAC, EDVAC, EDSAC & UNIVAC-1.
Second Generation(1956-63):
In 2nd generation computers, vaccum tubes were replaced by transistors. They required only 1/10 of power required by tubes. This generation computers generated less heat & were reliable. The first operating system developed in this generation.
The Third Generation(1964-71):
The 3rd generation computers replaced transistors with Integrated circuit known as chip. From Small scale integrated circuits which had 10 transistors per chip, technology developed to MSI circuits with 100 transistors per chip. These computers were smaller, faster & more reliable. High level languages invented in this generation.
The fourth Generation(1972- present):
LSI & VLSI were used in this generation. As a result microprocessors came into existence. The computers using this technology known to be Micro Computers. High capacity hard disk were invented. There is great development in data communication.

The Fifth Generation (Present & Beyond):
Fifth generation computing devices, based on artificial intelligence, are still in development, though there are some applications, such as voice recognition, that are being used today. The use of parallel processing and superconductors is helping to make artificial intelligence a reality. Quantum computation and molecular and nanotechnology will radically change the face of computers in years to come.

ARCHITECTURE OF COMPUTER

Input Devices: Those devices which help to enter data into computer system. Eg. Keyboad, Mouse, Touchscreen, Barcode Reader, Scanner, MICR, OMR etc.
                                       
Bar code Reader                     MICR used in Bank             OMR(Used for answer sheet evaluation)

Output Devices: Those devices which help to display the processed information. Eg. Monitor, Printer, Plotter, Projector
   Printer                                              Plotter                                      Projector

CENTRAL PROCESSING UNIT (CPU)
The main component to make a computer operate is the computer chip or microprocessor. This is referred to as the Central Processing Unit (CPU) and is housed in the computer case. Together, they are also called the CPU. It performs arithmetic and logic operations. The CPU (Central Processing Unit) is the device that interprets and executes instructions.
                     Processor


Memory: It facilitates the remembrance power to computer system. It  refers to the physical devices used to store programs (sequences of instructions) or data (e.g. program state information) on a temporary or permanent basis for use in a computer or other digital electronic device. The term primary memory is used for the information in physical systems which are fast (i.e. RAM), as a distinction from secondary memory, which are physical devices for program and data storage which are slow to access but offer higher memory capacity. Primary memory stored on secondary memory is called virtual memory. Primary Memory can be categorized as Volatile Memory & Non-Volatile Memory.
Volatile memory(RAM)
Volatile memory is computer memory that requires power to maintain the stored information. Most modern semiconductor volatile memory is either Static RAM or dynamic RAM.
SRAM retains its contents as long as the power is connected and is easy to interface to but uses six transistors per bit.
 
Dynamic RAM is more complicated to interface to and control and needs regular refresh cycles to prevent its contents being lost. However, DRAM uses only one transistor and a capacitor per bit, allowing it to reach much higher densities and, with more bits on a memory chip, be much cheaper per bit. SRAM is not worthwhile for desktop system memory, where DRAM dominates, but is used for their cache memories..
Non Volatile Memory (ROM)
Non-volatile memory is computer memory that can retain the stored information even when not powered.
Examples of non-volatile memory are flash memory and ROM/PROM/EPROM/EEPROM memory (used for firmware such as boot programs).

Cache Memory:
Cache memory is random access memory (RAM) that a computer microprocessor can access more quickly than it can access regular RAM. As the microprocessor processes data, it looks first in the cache memory and if it finds the data there (from a previous reading of data), it does not have to do the more time-consuming reading of data from larger memory. It is of two types- L1 cache is on the same chip as the microprocessor. L2 is usually a separate static RAM (SRAM) chip.

Secondary Memory:
A. Hard Disk (Local Disk)
B. Optical Disks: CD-R, CD-RW, DVD-R, DVD-RW
C. Pen Drive
D. Floppy Disks
F. Memory Cards
G. External Hard Disk
H. Blu Ray Disk
      
Blu-Ray Disk:
Blu-ray (not Blue-ray) also known as Blu-ray Disc (BD), is the name of a new optical disc format. The format offers more than five times the storage capacity of traditional DVDs and can hold up to 25GB on a single-layer disc and 50GB on a dual-layer disc. While current optical disc technologies such as DVD, DVD±R, DVD±RW, and DVD-RAM rely on a red laser to read and write data, the new format uses a blue-violet laser instead, hence the name Blu-ray.
 













Units of Memory:

The smallest unit is bit, which mean either 0 or 1.
1 bit                 = 0 or 1
1 Byte              = 8 bit
1 Nibble           = 4 bit
1 Kilo Byte       = 1024 Byte= 210 Byte
1 Mega Byte   = 1024 KB= 210 KB
1 Gega Byte    = 1024 MB= 210 MB
1 Tera Byte     = 1024 GB= 210 GB
1 Peta Byte     =1024 TB= 210 TB
1 Exa Byte      =1024 PB= 210 PB
1 Zetta Byte    = 1024 EB= 210 EB
1 Yotta Byte    = 1024 ZB= 210 ZB


Booting

The process of loading the system files of the operating system from the disk into the computer memory to complete the circuitry requirement of the computer system is called booting.

Types of Booting:

There are two types of booting:
• Cold Booting: If the computer is in off state and we boot the computer by pressing the power switch ‘ON’ from the CPU box then it is called as cold booting.

• Warm Booting: If the computer is already ‘ON’ and we restart it by pressing the ‘RESET’ button from the CPU box or CTRL, ALT and DEL key simultaneously from the keyboard then it is called warm booting.

 

Types of Computer

On the basis of working principle

a) Analog Computer

An analog computer is a form of computer that uses continuous physical phenomena such as electrical, mechanical, or hydraulic quantities to model the problem being solved.

Eg: Thermometer, Speedometer, Petrol pump indicator, Multimeter

               




 

b) Digital Computer

A computer that performs calculations and logical operations with quantities represented as digits, usually in the binary number system.

c) Hybrid Computer (Analog + Digital)

A combination of computers those are capable of inputting and outputting in both digital and analog signals. A hybrid computer system setup offers a cost effective method of performing complex simulations. The instruments used in medical science lies in this category.

On the basis of Size

a)    Super Computer

The fastest type of computer. Supercomputers are very expensive and are employed for specialized applications that require immense amounts of mathematical calculations. For example, weather forecasting requires a supercomputer. Other uses of supercomputers include animated graphics, fluid dynamic calculations, nuclear energy research, and petroleum exploration. PARAM, Pace & Flosolver are the supercomputer made in india.